KEY FEATURES:
- Uses 01 pure sine wave camera UPS with automatic power supply, 5ms switching time, automatically switching after a power failure, using 220V power, connected directly to the battery bank. The entire camera, security, and anti-theft system is connected to the UPS. In the event of a power outage, the system will automatically draw power from the battery to keep the security camera system operating normally.
- When power is available, the UPS for cameras will automatically fully charge the battery, with 3 smart charging modes that increase battery life.
- Your camera system can avoid many hazards such as: lightning strikes, electric shock… because the UPS has a very high load protection function. When lightning strikes, only the UPS is damaged.
- Backup runtime for your camera power supply ranges from 4–20 hours, or longer depending on the battery capacity.
- There are many types of UPS for cameras suitable for different power capacities.
- The total power of the devices using the UPS must be lower than the power of the UPS.
UPS-Camera 2: UPS AC2000VA/1200W
Solution for 8 cameras + 1 video recorder:
|
Equipment name |
Quantity |
Power |
|
Camera |
8 |
160W |
|
Video recorder |
1 |
120W |
|
Total power |
280W |
Backup time:
Using one AC1000 2000VA/1200W UPS unit, the backup time for a load of about 280W, customers can choose the battery type according to the table below.
|
Stt |
Battery Type |
Backup time |
|
1 |
24V/100Ah |
6 hours |
|
2 |
24V/150Ah |
9 hours |
|
3 |
24V/50Ah |
3 hours |
SOLUTION DIAGRAM:
The value your company creates for the community and society every day is enormous — don't let your company's work be interrupted by UPS.
Contact us for direct consultation and the best product and service pricing:
LISA CONTROL TECHNOLOGY CO., LTD
Tel/Fax: +84 24 7309 9997
Address (Office): No. 10 LK10, Ha Tri Service Land Area, Ha Cau Ward, Ha Dong District, Hanoi City
Website: www.lisatech.vn
